Decorating

Taper candles add elegance to your dinner table. They are perfect for romantic evenings at home. You can make your own taper candles without much experience in candle making. The process of making taper candles involves and dipping rather than using molds or jars. Hand dipping takes some practice to get the hang of, but you will be a pro in no time. While you are practicing, you can melt that wax down again and again until you known the right way to form your taper candles. During practice, don’t add any color either to keep the costs low.

You will need to purchase a dipping can from a craft store or online to make taper candles correctly. A double boiler is to narrow to make this long candles. In addition, you will need a thermometer, wax, wick, dye for color, and fragrances to add scent if you desire. It is important you buy wick specially designed for taper candles. If you use pillar wick, your taper candles won’t burn properly. To make the best quality taper candles you will want to use paraffin wax. Beeswax can bend easier, especially on warm days.

To melt the wax properly, use a large pot with a few inches of water for the dipping can to sit in. Never place the dipping can directly on the stove top as this is a safety issue. You may also expose your home to toxic fumes. While your wax is melting, work on your wicks. It is important you buy wick specially designed for taper candles. If you use pillar wick, your taper candles won’t burn properly. Cut the wick at least four inches longer than you want your candles to be. If you are making sets of taper candles, make sure each wick is cut the same exact length. This is easy to do by cutting one, then folding other pieces over and making a few more cuts.

Once you wax has melted and at a temperature of between 150 and 165 degrees, you can start the dipping process. If you are going to add color or scent you will want to do it now. Move the dipping can to a flat, dry surface. If you are using a counter top, place a towel or cookie sheet under the dipping can. Take a wick and dip it into the hot wax. You will only be getting the wick covered the first few dips.

The process of dipping taper candles is easy, yet time consuming. You will get the best looking candles if you don’t try to rush the process. Each dip should be a quick in and out process. Don’t allow the candle to linger in the wax hoping it will absorb more. Instead, it will cause your taper candles to have a chunky texture rather than a smooth finish. As the wax starts to cool off take the time to stop dipping and heat it again. Some candle makers dip while they have another dipping can of wax melting on the stove. This way, once the wax they are working with cools they can switch. This keeps the process going if you are able to take advantage of it.

The number of times you will dip each candle depends on the width you want them. If you are making pairs, keep track of how many times you dip each one so they will match. As the wax begins to cool after each dip, you can dip it again. As the candle gets wider you will need to allow it to cool longer after each dip. You can also try dipping two at the same time – allowing one to cool while you dip the other of the set. Once the candle is the desired size and cools completely, cut the wick to 1/4 inch of the top of the candle.

Making hand dipped taper candles is a great project. The process is not difficult once you get the process of the dipping down. These candles are great center pieces and often used at weddings. You can make them any color you like for the occasion. There are many gorgeous taper candle holders on the market to add even more appeal to the lovely candles you created.

{ 0 comments }

Solving the Color Matching Dilemma

It’s happened to the best of us. We go shopping, searching for those delightful goodies to add new life to rooms. Of course, everything has to match. We find absolutely perfect items, and are sure the colors are perfect. We are confident in our selections, ready to add that special touch to every room in the house. Then the unthinkable happens. You arrive home, unload your treasures, only to discover the newly bought items don’t match your colors in the home.

How could this have been prevented? There’s a rather simple solution to be positive that will not occur again. You need a Fabric And Paint Chip Notebook.

A Fabric And Paint Chip Notebook is easy and fairly quick to make, then keep updated. It holds samples of the colors throughout your home, such as walls and ceilings, curtains and drapes, linens, etc.

There’s more than one way to make one of these, and it doesn’t have to be in a notebook. You can change it to fit your particular likes and needs.

What To Do:
First, you will need a small purse or pocket size spiral notebook, small blank 3 x 5 index cards cut in half or heavier stock paper, cut in small squares, a small paint brush, and something such as newspaper to paint on.

When you paint a room, before beginning the room, take a half of the 3 x 5 index card or square of stock paper, and paint one side of it with the paint you are about to use for the room. Make sure your surface is covered with the newspaper to prevent an accident. Allow this to dry. The reason I like to paint the sample first is that if I wait til after painting the room, I might run out of paint, or forget to make the sample.

Do this for each room or part of a room that you paint, each time, unless it is the exact same color. Once the sample is dry, tape or glue it into the notebook, and on the same page, write the paint color name, type of paint, such as latex or oil based, and the room or room area it was used on.

Fabrics can be done in the same manner. When you buy new drapes, for example, it’s often hard to match colors. It doesn’t have to be difficult. Curtains and drapes usually have huge hems. You can carefully use sharp scissors, turn the curtain over to expose the hem area, and cut a small spot to place in your notebook. It is important not to cut through, of course. This also works well for some bed linens, but not always. If there is not enough of a hem to take a sample without it being obvious, I opt for no sample rather than ruining the piece.

While this might bother some, cutting a small area from their drapes and linens, it’s a nice idea when it comes to shopping for those matching colors, plus it saves many repeated and unnecessary trips back to the store for returns.

Wall paper samples are the easiest and most convenient to place in the Notebook. Simply cut a small sample of the wall paper, place it in the Notebook, and make a note of the name of it, perhaps even the place of purchase, and the room or room areas it’s located in.

Perhaps you’d like to buy color coordinated items to match wall decor. Some items, such as a painting, cannot have a sample taken from it to place in your Fabric And Paint Chip Notebook. One idea is to take a photo of the object with a digital camera, in good lighting, so that the finished photo’s colors match that of the actual object. You might print this off on good photo paper and add to your Notebook, or keep with it.

Decorating the home can cause frustration to take the place of what should be a fun and exciting time. Don’t let mismatched colors bring you to the point of glume and despair. Try making your own Fabric and Paint Chip Notebook.

{ 0 comments }